NOTICE:

Wear protective gloves. Sharp areas on the parts may injure your hands.

2. REMOVE REAR SEAT LOCK COVER OUTER LH

(a) Remove the screw.

(b) Disengage the 3 claws in the order shown in the illustration, and then remove the rear seat lock cover inner.

3. REMOVE REAR SEAT LOCK COVER INNER RH

(a) Remove the screw.

(b) Disengage the 4 claws in the order shown in the illustration, and then remove the rear seat lock cover inner.

4. REMOVE REAR NO. 2 SEAT CUSHION ASSEMBLY LH

(a) Remove the 2 bolts.

(b) Using a T45 "TORX" socket, remove the 2 bolts and 2 bushes. Then remove the rear No. 2 seat cushion assembly.

5. REMOVE NO. 3 SEAT CUSHION SPRING ASSEMBLY LH

(a) Remove the 7 hog rings.

(b) Remove the hooks and No. 3 seat cushion spring assembly.

6. REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY LH

(a) Remove the 13 hog rings and No. 2 seat cushion cover sub-assembly.

7. REMOVE REAR SEAT CUSHION COVER LH

(a) Remove the screw.

(b) Disengage the claw and remove the rear seat cushion cover.

8. REMOVE REAR SEAT CUSHION COVER INNER RH

(a) Remove the screw.

(b) Disengage the claw and remove the rear seat cushion cover.

9. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY

10. REMOVE REAR SEAT HEADREST ASSEMBLY

11. REMOVE REAR NO. 2 SEATBACK COVER LH

(a) Disengage the 3 claws and remove the rear No. 2 seatback cover.

12. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH

(a) Disengage the 12 clips and remove the rear seatback board sub-assembly.

13. REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY

(a) Disengage the 8 claws and remove the 4 rear No. 2 seat headrest supports.

14. REMOVE SEATBACK COVER WITH PAD

(a) Disengage the 2 wire harness clamps.

(b) Disengage the hooks and remove the seatback cover with pad.

(c) Remove the clip and rear seat belt hook.

(d) Remove the hog ring and seatback cover with pad.

15. REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY LH

(a) Remove the 16 hog rings and No. 2 seatback cover from the seatback pad.

16. REMOVE REAR SEAT WIRE HARNESS NO. 2

(a) Disconnect the 3 connectors.

(b) Disengage the 4 wire harness clamps and remove the rear seat wire harness No. 2.

17. REMOVE RECLINING CONTROL BASE LH

(a) Remove the 2 bolts and reclining control base.

18. REMOVE NO. 3 SEATBACK FRAME SUB-ASSEMBLY LH

(a) Remove the 3 bolts and No. 3 seatback frame sub-assembly.

19. REMOVE POWER SEAT MOTOR ASSEMBLY RH

(a) Remove the 2 washers and reclining connecting pipe.

(b) Remove the 3 bolts and power seat motor assembly.

20. REMOVE POWER SEAT MOTOR ASSEMBLY LH

(a) Remove the 3 bolts and power seat motor assembly.

21. REMOVE REAR NO. 2 SEAT ROD SUB-ASSEMBLY

(a) Remove the 2 bolts and No. 2 seat rod sub-assembly.